×

fire timed meaning in Chinese

耐火的

Examples

  1. By the investigation for preparation technique of the phosphor , the optimum activator concentration , host composition and firing time were established
    通过对荧光粉制备工艺的研究,确定了荧光粉制备中最佳的激活剂浓度、基质的组成及样品的灼烧时间等工艺参数。
  2. Today i feel more than happy to have the opportunity to gather together with leaders of nine asean countries for the fires time to discuss and explore the development of chinese - asean friendship and cooperation oriented toward the 21st century
    今天,我有机会同东盟九国的领导人首次会晤,探讨发展中国与东盟各国面向二十一世纪的友好合作,感到十分高兴。
  3. The firing time is about 24 hours and the firing temperature is at about 1300c . lighting fireis after finishing the laying bricks for building the kiln entrance . the fuel is pine firewood . the kiln keeper , as a technical director is watching the degree of firing and controlling the change of thekiln temperature and determining the time of stopping fire
    烧窑时间过程约一昼夜,温度在1300度左右。先砌窑门,点火烧窑,燃料是松柴,把椿工技术指导,测看火候,掌握窑温变化,决定停火时间。
  4. Based on orthogonal designed experiment , the synthesis of corundum - mullite - gahnite multiphase materials by two - step sintering process showed that the light fired temperature and holding time mostly influenced the apparent porosity of the multiphase materials . further study on the light firing time indicated that at the light firing temperature of 1300 and died fire temperature of 1600 for 3h , the optimal light fired time was about 1h
    二次煅烧及正交实验合成复相材料研究表明:轻烧温度和轻烧时间对复相材料的显气孔率影响显著;通过轻烧保温时间的进一步研究表明:含刚玉、莫来石、锌铝尖晶石的复相材料,在轻烧温度为1300 、终烧条件为1600下保温3h时,最佳的保温时间为1小时左右。
  5. A series of preparation conditions and parameters were systematically studied . it is concerned that the effects of prepared method of precursor , material synthesize method , fired atmosphere , fired temperature , fired time , flux kind and content , rare earth concentration and kind and matrix on the microstructure and optical storage properties of the samples . at the same time , the optical storage mechanism was discussed in certain extent
    系统地研究了一系列的工艺条件及参数,讨论了前驱物制备方法、材料合成方法、灼烧气氛、灼烧温度、灼烧时间、助熔剂种类及含量、稀土掺杂浓度及种类、基质成分对样品微观结构及光存储性能的影响,同时对样品的光存储机理作了一定程度的探讨。

Related Words

  1. fire throwing method
  2. fire tile
  3. fire timmed
  4. fire tongs
PC Version

Copyright © 2018 WordTech Co.